マニュアル嫁って事だけど。抜粋ね。
FTPとかUSBでスイッチローカルに保存。そっからの話。
To upgrade the software images:
1. Specify the upgrading image file (newest.ipe in this example) used at the next startup
for the master switch, and assign the M attribute to the boot and system images in the
file.
<Sysname>
boot-loader file flash:/newest.ipe slot 1 main
Images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to target slot.
The specified file list will be used as the main startup software images at the next
reboot on slot 1.
2. Specify the upgrading image file used at next startup for the subordinate switch, and
assign the M attribute to the boot and system images in the file. (As a result, the
subordinate switch automatically copies the file to the root directory in its Flash
memory.)
<Sysname>
boot-loader file flash:/newest.ipe slot 2 main
Images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to target slot.
The specified file list will be used as the main startup software images at the next
reboot on slot 2. Hewlett-Packard Development Company, L.P. 25
3. (Optional) If the IRF fabric size has a lot of members, enable the software auto-update
function.
<Sysname>
system-view
[Sysname]
irf auto-update enable
[Sysname]
quit
Software auto-update is typically used for synchronizing the software images of the master
switch to new member switches when you expand the IRF fabric. This function enables a
subordinate switch to compare its main startup software image version with that of the IRF
master. If the versions are different, the subordinate switch automatically downloads the
current software images from the master, sets the downloaded images as the main
software images at the next reboot, and automatically reboots with the new images to
re-join the IRF fabric. In this upgrade process, the function avoids the failure of assign all the
subordinate switch the same main software image file as the master switch causing an
upgrade failure.
4. Save the current configuration in any view to prevent data loss.
<Sysname>
save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait.................
Saved the current configuration to mainboard device successfully.
Slot 2:
Save next configuration file successfully.
5. Reboot the IRF fabric to complete the upgrade.
<Sysname>
reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
The system automatically loads the .bin boot and system images in the .ipe file and
sets them as the startup software images.
6. Perform the display version command in any view to verify that the current main
software images have been updated (details not shown).
